1 Body
1 Body
Made of sheet steel or stainless steel, with a continuous, twice angled sealing edge to protect against incoming water and dirt.
2 Base wall
2 Base wall
With one or two stamped flange apertures that are sealed with screwed flange plates and seal. Versions are also available without flange plates. (Having the cable entry processed directly from us permits optimal use of the space.)
3 Back wall
3 Back wall
With four holes Ø 8.3 mm for wall mounting and four M8 threaded bolts for securing the mounting plate.
4 Doors
4 Doors
One or two front doors made of sheet steel or stainless steel, chamfered and welded on the edges. Two vertical mounting strips with row of holes Ø 3.6 mm and foam seal. One door up to a width of 800mm, 2 doors as from a width of 800mm (on request also with two doors as from a width of 400 mm). Two 120° hinges attached either on the right or left, with three hinges as from a height of 1000 mm. Special version: door also in the back wall.
5 Mounting plate
5 Mounting plate
Made of sheet steel, galvanised (on order also coated). Can be mounted on fixing bolts on the back wall. Chamfered mounting plate as from a height of 1000 mm.
6 Locking system
6 Locking system
Casement fastener, and two casement fasteners as from a height of 500 mm. Rod lock system with key plate where the height exceeds 1000 mm (possible as from 800 mm). Operating mechanism: 3-mm double bit, flexible and interchangeable.
7 Flange plate(s)
7 Flange plate(s)
Made of sheet steel or stainless steel, size and quantity depending on the width and depth of the wall-mounted control cabinets. Flange plates for stainless steel version only if specially ordered.